10 Best Oscillating Tools [2019 Complete Guide]

Best Oscillating Tool

The oscillating tool is a versatile and easy-to-use tool that can be used for a wide range of handyman tasks.  

It is comprised of a blade attachment that moves at high speed in a back-and-forth motion. This fast motion allows the blade to cut, trim, sand, or scrape with great effectiveness.

Here are some common uses of the oscillating tool:

  • Removing rust from metal surfaces
  • Trimming wood or plastic
  • Removing old paint
  • Making plunge cuts in material
  • Sanding wood

Of course, there are more uses as this tool is extremely versatile, and its functionality depends on the attachment you use.

Without any ado, let’s check our oscillating tool review below to see which model you need to get.

10 Best Oscillating Tools – Reviews

IMAGE

​PRODUCT

​FEATURES

Rockwell RK5151K

1. Rockwell RK5151K (Superior Oscillating Tool for Cutting)

  • The superior oscillating angle of 3.4 and 5.0 degrees for aggressive cuts
  • Equipped with a powerful motor of 4.2 Amps
  • Durable and long-lasting build construction
  • Ergonomic design
DeWalt DCS355D1

2. DeWalt DCS355D1 (Cordless Model with Excellent Maneuverability)

  • Cordless and highly maneuverable
  • Versatile speed of 0 to 20,000 OPM
  • Changing the blade is tool-less
  • You get 28 accessories out of the box
DeWalt DWE315K

3. DeWalt DWE315K (Durable and Long-lasting)

  • Rugged construction. Durable and long-lasting
  • Ergonomic handle. Comfortable to hold
  • Equipped with a bright LED
Porter-Cable PCE605K52

4. Porter-Cable PCE605K52 (Heavy-duty and Ergonomic Design)

  • Can be used for heavy-duty applications
  • Ergonomic design with rubber coating. Comfortable to use
  • Versatile speed of 10,000 to 22,000 OPM
Rockwell RK5132K

5. Rockwell RK5132K (Extremely Lightweight and Highly Maneuverable)

  • The most lightweight oscillating tool at 2.9 lbs.
  • Very maneuverable and does not cause hand fatigue
  • The superior oscillating angle of 4 degrees. Excellent for cutting
Bosch GOP40-30C

6. Bosch GOP40-30C (Aggressive Cuts in Material)

  • Can aggressive the cutting material due to its oscillating angle of 3 degrees
  • A powerful motor of 4.0 Amps
  • Bright LED light
Fein FMM350QSL

7. Fein FMM350QSL (Lightweight and Easy to Use)

  • Lightweight at 3.13 lbs
  • Easy to use by absolute beginners
  • Flexible. It can be purchased as both a corded and cordless model
Dremel MM40-05

8. Dremel MM40-05 (Excellent Price to Performance Ratio)

  • Superior price to performance
  • It can cut deep into material with an oscillating angle of 3.2 degrees
  • You get 36 accessories with this purchase
Black & Decker BD200MTB

9. Black & Decker BD200MTB (Best Budget Oscillating Multitool)

  • Very affordable pricing
  • Equipped with 6 variable speed. Easy to change
  • Ergonomic design and easy to maneuver
Makita TM3010CX1

10. Makita TM3010CX1 (Great for Both Amateur and Professionals)

  • Rich set of features for both beginners and professionals
  • The superior oscillating angle of 3.2 degrees
  • Electronic speed control for better performance

PRODUCT

1. Rockwell RK5151K

 (Superior Oscillating Tool for Cutting)

Rockwell RK5151K
  • The superior oscillating angle of 3.4 and 5.0 degrees for aggressive cuts
  • Equipped with a powerful motor of 4.2 Amps
  • Durable and long-lasting build construction
  • Ergonomic design

2. DeWalt DCS355D1

 (Cordless Model with Excellent Maneuverability)

DeWalt DCS355D1
  • Cordless and highly maneuverable
  • Versatile speed of 0 to 20,000 OPM
  • Changing the blade is tool-less
  • You get 28 accessories out of the box

3. DeWalt DWE315K 

(Durable and Long-lasting)

DeWalt DWE315K
  • Rugged construction. Durable and long-lasting
  • Ergonomic handle. Comfortable to hold
  • Equipped with a bright LED

4. Porter-Cable PCE605K52 

(Heavy-duty and Ergonomic Design)

Porter-Cable PCE605K52
  • Can be used for heavy-duty applications
  • Ergonomic design with rubber coating. Comfortable to use
  • Versatile speed of 10,000 to 22,000 OPM

5. Rockwell RK5132K

(Extremely Lightweight and Highly Maneuverable)

Rockwell RK5132K
  • The most lightweight oscillating tool at 2.9 lbs.
  • Very maneuverable and does not cause hand fatigue
  • The superior oscillating angle of 4 degrees. Excellent for cutting

6. Bosch GOP40-30C 

(Aggressive Cuts in Material)

Bosch GOP40-30C
  • Can aggressive the cutting material due to its oscillating angle of 3 degrees
  • A powerful motor of 4.0 Amps
  • Bright LED light

7. Fein FMM350QSL

 (Lightweight and Easy to Use)

Fein FMM350QSL
  • Lightweight at 3.13 lbs
  • Easy to use by absolute beginners
  • Flexible. It can be purchased as both a corded and cordless model

8. Dremel MM40-05 

(Excellent Price to Performance Ratio)

Dremel MM40-05
  • Superior price to performance
  • It can cut deep into material with an oscillating angle of 3.2 degrees
  • You get 36 accessories with this purchase

9. Black & Decker BD200MTB

 (Best Budget Oscillating Multitool)

Black & Decker BD200MTB
  • Very affordable pricing
  • Equipped with 6 variable speed. Easy to change
  • Ergonomic design and easy to maneuver

10. Makita TM3010CX1

 (Great for Both Amateur and Professionals)

Makita TM3010CX1
  • Rich set of features for both beginners and professionals
  • The superior oscillating angle of 3.2 degrees
  • Electronic speed control for better performance

1. Rockwell RK5151K – Superior Oscillating Tool for Cutting

Editor's Rating: 4.6 out of 5 stars (4.6 / 5)

Rockwell RK5151K
  • Power: 4.2 Amps
  • Power Source: Corded Electric
  • Speed: 10,000 - 19,000 OPM
  • Oscillating angle: 3.4 and 5.0 degrees
  • Weight: 4 lbs

There are many factors that demark the Rockwell RK5151K from the rest of the competition. The oscillating angle of this unit is 3.5 degrees and 5 degrees which is very slanted. This allows the blade to penetrate deep in material for a more effective cutting process.

Additionally, this model has an excellent built construction that makes it durable and long-lasting. The molded plastic on top of this tool is ergonomic and provides you with a firm grip.

The variable speed of 10,000 to 19,000 OPM makes it very practical to use. Especially if you have a cut or sand material fast, the lower OPM will help.

And when you count the superior motor of 4.2 Amps, this model is unbeatable. It can be used as a heavy-duty oscillating tool for professional work.

You can also purchase this model with a soft case or as a complete oscillating kit. It comes with 10 accessories for versatility and a carry bag.

The only negative side with this oscillating tool is the locking mechanism for the blade is a bit difficult to lock. Also, it does not come with proper instructions.

But all things considered. Especially when it comes to performance and oscillating angle, this model is one of the best oscillating tools out there.

Pros:

  • The superior oscillating angle of 3.4 and 5.0 degrees. Can cut deep
  • A powerful motor of 4.2 Amps
  • Excellent build construction. Durable and long-lasting
  • Ergonomic and easy to hold

Cons:

  • The locking mechanism is difficult to use
  • Does not come with instructions

Notes

Since this model does not come with instructions, we do not recommend it for absolute beginners

2. DeWalt DCS355D1 – Cordless Model with Excellent Maneuverability

Editor's Rating: 4.7 out of 5 stars (4.7 / 5)

DeWalt DCS355D1
  • Power: 4.0 Amps
  • Power Source: Cordless
  • Speed: 0 - 20,000 OPM
  • Oscillating angle: 1.6 degrees
  • Weight: 7 lbs

The DeWalt DCS355D1 is one of the best cordless oscillating tools on the market. Since it does not have a wire that will get in the way, you can use it any awkward positions. It’s highly maneuverable.

Above all, this model is powered by a heavy-duty lithium-ion battery. Under the hood, there is a performing 4.0 Amps motor that will not stall on anything.

Moreover, this model also shines when it comes to variable speeds. You can comfortably adjust it anywhere from 0 – 20,000 OPM. You do so by simply varying the pressure you apply on the power switch. Pretty neat!

Out of the box, you get a complete kit with this purchase. It comes with 28 original DeWalt accessories as well as a heavy-duty plastic storage case. As we can see, this model is extremely versatile.

Moreover, changing the accessories is very easy because it has a quick-release system. Simply push a button to release the blade. Very easy to replace.

The only negatives we can point out with the DeWalt DCS355D1 is its weight. At 7 lbs, it is quite heavy and can cause hand-fatigue with prolonged usage.  

However, its oscillating angle of 1.6 degrees is a bit poor. This model is clearly intended for almost any task that does not involve heavy-duty cutting.

Pros:

  • Cordless model. Highly maneuverable
  • Versatile variable speeds of 0 – 20,000 OPM
  • Easy to change the blades. Does not require tools
  • Comes as a complete kit. You get 28 accessories

Cons:

  • Poor oscillating angle. Not for heavy-duty cutting
  • A little bit heavy at 7 lbs

3. DeWalt DWE315K – Durable and Long-lasting

Editor's Rating: 4.6 out of 5 stars (4.6 / 5)

DeWalt DWE315K
  • Power: 3.0 Amps
  • Power Source: Corded Electric
  • Speed: 0 - 22,000 OPM
  • Oscillating angle: N/A
  • Weight: 3.1 lbs

The DeWalt DWE315K is an oscillating tool made from high-quality materials. This makes this model very durable and long-lasting and able to cope with the demands of the busy workshop.

You can use this model professionally and every day for a wide range of tasks without it breaking down.

One of the best features of this unit is that you get 29 accessories with this purchase that makes it versatile. Furthermore, it is equipped with a quick-change accessory system that does not require any tool. Simply press a button to release the blade.

It also has a bright LED light which allows you to see exactly where you are cutting or sanding. This is great for those working in lowlight conditions.

What we also like about this unit is its weight of 3.1 lbs. This model is one of the lightest and most maneuverable that you will find in this review.

When it comes to the ergonomics, no problem. This model is coated with a soft rubber finish at the handle that makes it very comfortable to hold. Also, you can quickly and easily change the speed anywhere from 0 to 22,000 OPM with this oscillating tool. You don’t have to leave the handle to do so. Pretty neat!

The only caveats we note with this product is that it is longer than other oscillating tools. It may be difficult to use this model in tight areas. Also, the power button is sensitive, and you can accidentally power it. You need to observe due diligence when operating this oscillating tool.

But despite all those, it is no surprise to us that most oscillating tool comparisons online rate the DeWalt DWE315K highly. After all, this model is made to last and is extremely easy to use.

Pros:

  • Superior build construction. Durable and long-lasting
  • Easy to change the blade with the quick-change system
  • Very lightweight at 3.1 lbs. Highly maneuverable
  • Bright LED illuminates the working area

Cons:

  • A bit longer than average
  • The power button is a little bit too sensitive

4. Porter-Cable PCE605K52 – Heavy-duty and Ergonomic Design

Editor's Rating: 4.5 out of 5 stars (4.5 / 5)

Porter-Cable PCE605K52
  • Power: 3.0 Amps
  • Power Source: Corded Electric
  • Speed: 10,000 - 22,000 OPM
  • Oscillating angle: N/A
  • Weight: 7.65 lbs

The Porter-Cable PCE605K52 is a heavy-duty oscillating tool that comes with a rich set of features. But above all, this model is coated with a rubber finish that makes it very comfortable to hold for an extended period.

This model is also equipped with a quick-change system which means that you do not need tools to change the blade. Simply push a button, and it will release the blade for you. Very easy to use!

Additionally, you get no less than 52 accessories with this purchase which makes it value for money. Not to mention that you get a handy plastic carry case with it for storage.

Of course, as with most top-rated oscillating tools on the market, this model has a variable speed control of 10,000 to 22,000 OPM. You can easily change the speed with the speed adjustment button at the top of the unit.

However, this device is not perfect, and the main problem with it is its weight of 7.65 lbs. When compared to other models in this review, it is the heaviest.

Pros:

  • Excellent for heavy-duty cutting, trimming, or sanding applications
  • Coated with a rubber finish for handling comfort
  • Versatile speed of 10,000 to 22,000 OPM

Cons:

  • Heavier than other models at 7.65 lbs

5. Rockwell RK5132K – Extremely Lightweight and Highly Maneuverable

Editor's Rating: 4.6 out of 5 stars (4.6 / 5)

Rockwell RK5132K
  • Power: 3.5 Amps
  • Power Source: Corded Electric
  • Speed: 11,000 - 20,000 OPM
  • Oscillating angle: 4 degrees
  • Weight: 2.9 lbs

What demarks the Rockwell RK5132K from the rest of the competition is its lightweight. Indeed, this model only weighs 2.9 lbs which makes it the best corded oscillating tool when it comes to weight in this review.

What we also like about this unit is that it is very suitable for cutting purposes. With its oscillating angle of 4 degrees, the blade is sufficiently slanted so that it can penetrate deeper into material for effective cutting.

Moreover, the variable speed of 11,000 to 20,000 OPM makes it quite versatile. You can easily change the speed with the push of a button located at the top of the unit. Also, this model has an ergonomic design which makes it easy to hold for an extended period.

You also get no less than 32 accessories with this purchase, along with a heavy-duty carry bag. The only thing we don’t like about this oscillating tool is the provided sanding pads do not adhere firmly to the Velcro.

Pros:

  • Very lightweight at 2.9 lbs. Extremely maneuverable
  • The high oscillating angle of 4 degrees. Excellent for cutting purposes
  • Easy to change the speed with the push of a button

Cons:

  • The provided sanding pads do not adhere firmly

6. Bosch GOP40-30C – Aggressive Cuts in Material

Editor's Rating: 4.5 out of 5 stars (4.5 / 5)

Bosch GOP40-30C
  • Power: 4.0 Amps
  • Power Source: Corded Electric
  • Speed: 0 - 20,000 OPM
  • Oscillating angle: 3 degrees
  • Weight: 3.3 lbs

If you want one of the best oscillating tools when it comes to cutting, then few models can beat the Bosch GOP40-30C.

This superior ability for cutting is largely explained by 2 factors. First, it has a powerful motor of 4.0 Amps that provides the blade with enough power to cut through anything. Furthermore, the oscillating angle of 3 degrees is slanted enough so as the blade can penetrate deeply in the material.

With this purchase, you also get a complete kit. You will get multiple blades and sanding accessories, as well as a convenient carry case.

And for even more security on the job, you get a bright LED at the front of the device. It will illuminate the work area quite well in lowlight conditions.

The only thing we don’t like with this model is that it is difficult to get blade replacements. Also, the carry case quality could have been better.

Pros:

  • The high oscillating angle of 3 degrees allows it to cut aggressively
  • Equipped with a powerful motor of 4.0 Amps
  • Bright LED for illumination

Cons:

  • Difficult to get blade replacements
  • The carry case is not the highest quality we have seen

Notes

This model is compatible only with OSL (Starlock) blades. Even if the manufacturer advertises it to be compatible with older OIS and OSC blades, you should stick with OSL for best compatibility.

7. Fein FMM350QSL – Lightweight and Easy to Use

Editor's Rating: 4.5 out of 5 stars (4.5 / 5)

Fein FMM350QSL
  • Power: N/A
  • Power Source: Corded Electric
  • Speed: 10,000 - 19,500 OPM
  • Oscillating angle: 1.7 degrees - 3.5 degrees
  • Weight: 3.13 lbs

With its weight of only 3.13 lbs, the Fein FMM350QSL is a top-rated oscillating tool that is hard to beat when it comes to maneuverability. It can easily be operated by absolute beginners for an extended period without hand fatigue.

Moreover, its oscillating angle is quite versatile and adjustable. You can use this model for a wide range of applications, from sanding to cutting material.

For even more versatility, you can quickly and easily adjust the speed anywhere from 10,000 to 19,5000 OPM. This will allow you to adapt the speed of the blade to the material you are working on.

But best of all, you have to the possibility to get this model as both corded and cordless depending on your need. Not to mention that you get a full range of accessories as well as a convenient carry case with this unit.

The only issue we take with this tool is that it vibrates a little bit more than the competition.

Pros:

  • Lightweight at 3.13 lbs. Maneuverable
  • Easy to use by beginners
  • Flexible. Can be purchased as corded or cordless

Cons:

  • Vibrates more than the competition

8. Dremel MM40-05 – Excellent Price to Performance Ratio

Editor's Rating: 4.4 out of 5 stars (4.4 / 5)

Dremel MM40-05
  • Power: 3.8 Amps
  • Power Source: Corded Electric
  • Speed: 10,000 - 21,000 OPM
  • Oscillating angle: 3.2 degrees
  • Weight: 4.5 lbs

There are 2 major departments where the Dremel MM40-05 is one of the best corded oscillating tools on the market. Price and performance.

In fact, with its motor of 3.8 Amps, this oscillating tool is powerful enough to cut through any material without stalling. It will offer a reliable performance throughout.

Moreover, it has a versatile speed of 10,000 to 21,000 OPM that allows it to adapt to almost any task. What we also like about this oscillating tool is its oscillating angle of 3.2 degrees.

With such a steep angle, this model will do a superior job at cutting. This is because the blade can penetrate deeper into the material. And thanks to its powerful motor, it will do an excellent job cutting through almost anything.

You get a plastic carry case with this purchase, and it comes with no less than 36 accessories. The only thing we don’t like about this model is that it is bigger than the average oscillating tool size. You may need to use both hands to operate this device.

Pros:

  • Superior price to performance ratio
  • Performing motor of 3.8 Amps. It can cut through any material without stalling
  • The deep angle of 3.2 degrees for heavy-duty cutting
  • Comes with a carry case and 36 accessories. Good value

Cons:

  • Big and requires 2 hands to operate

9. Black & Decker BD200MTB – Best Budget Oscillating Multitool

Editor's Rating: 3.9 out of 5 stars (3.9 / 5)

Black & Decker BD200MTB
  • Power: 2.5 Amps
  • Power Source: Corded Electric
  • Speed: 10,000 - 20,000 OPM
  • Oscillating angle: 1.4 degrees
  • Weight: 4.5 lbs

Not everyone can afford an oscillating tool that costs several hundred dollars. This is where solutions like the Black & Decker BD200MTB comes into play. Indeed, based on price alone, this model is by far the best budget oscillating multitool that you can get.

And despite being so affordable, it still has very interesting features that make it worthwhile. It is powered by a decent motor of 2.5 Amps. This is not the most powerful motor we have seen in an oscillating tool, but it is certainly decent enough for most people.

Furthermore, it has an oscillating angle of 1.4 degrees which is not very slanted. This model is clearly not intended for heavy-duty cutting but rather for sanding or trimming.

The general form factor of this oscillating tool is very ergonomic and maneuverable despite being a corded model. This multitool also comes with 6 varying speeds that make it flexible. You can quickly and easily change the speed anywhere from 10,000 OPM to 20,000 OPM.

Moreover, it is quite easy to use. This model uses a tool-free blade release system that will allow you to change the blade in a matter of seconds. Talking about the blade, you get 13 different accessories with this purchase.

However, the only caveats we can point out here is its build construction which is not the best out there. It is also a little bit noisy. We don’t recommend this model for heavy-duty usage.

Pros:

  • The most affordable solution in this review
  • Comes with 6 varying speeds that are easy to change
  • Ergonomic and maneuverable despite being corded

Cons:

  • Not the best build construction. Not for heavy-duty usage
  • A little bit noisier than others

10. Makita TM3010CX1 – Great for Both Amateur and Professionals

Editor's Rating: 4.7 out of 5 stars (4.7 / 5)

Makita TM3010CX1
  • Power: 3.0 Amps
  • Power Source: Corded Electric
  • Speed: 6,000 - 20,000 OPM
  • Oscillating angle: 3.2 degrees
  • Weight: 4 lbs

The Makita TM3010CX1 is a professional-grade oscillating tool that comes with a rich set of features. It is a great model for both amateur and professionals.

This model does not have the most powerful motor with a rated 3.0 Amps, but it is still more than enough for everyday cutting, trimming, and sanding.

What we really like about this model is its variable speed which allows the blade to move at a speed of 6,000 to 20,000 OPM. Adjusting the speed is very easy, and you can do so with the speed adjustment knob located at the top of the tool.

But above all, the speed of the blade is controlled electronically. This tool will automatically keep the speed of the blade constant regardless of the task you have at hand.

Moreover, the oscillating angle of 3.2 degrees is sufficiently slanted to allow the blade to penetrate deep in material. When it comes to cutting, the Makita TM3010CX1 is certainly one of the best oscillating tools for the money.

The only thing we didn’t like about it is that the rubber shield to the top of the tool is fragile and can easily get damaged.

Pros:

  • The decent oscillating angle of 3.2 degrees
  • Easy to adjust the speed of the blade
  • Speed is controlled electronically for better performance

Cons:

  • Top rubber shield can easily get damaged

How to Buy the Best Oscillating Tool

How to Buy the Best Oscillating Tool

1. Corded or Cordless

The oscillating tool comes in 2 types. A corded and cordless model. Each has its own advantages and disadvantages.

Corded Oscillating Tool: Since the corded oscillating tool has a wire that connects it to an electric socket, it can take more power.

Therefore, the corded oscillating tool is usually more powerful than its cordless counterpart.

Additionally, despite being less maneuverable than a cordless model, the corded oscillating tool is also usually lighter because it has simpler parts with no heavy battery in it.

Cordless Oscillating Tool: The cordless oscillating tool is equipped with a lithium-ion battery that makes it portable.

One of the biggest advantages of this type of oscillating tool is maneuverability. You can use it in any position without a wire getting in the way.

The main disadvantage of the cordless oscillating tool is that it requires a frequent recharge. However, if you are working in a location with no power, then the cordless oscillating tool is an excellent choice.

2. Motor power

The motor power in an oscillating tool is usually measured in ampere. The higher the ampere, the more powerful the motor can be assumed to be.

Having an oscillating tool with a powerful motor will guarantee that it will not stall when cutting through tough material. It will also ensure reliable and smooth operation.

In most cases, a motor of at least 3 Amps is more than enough for general cutting, trimming, or sanding with an oscillating tool.

But if you want a high performing and heavy-duty oscillating tool that will not stall when cutting hard materials, go with a model equipped with a 4.0 Amps or more motor.

3. Variable speed

Many top-rated oscillating tools provide you with the possibility to adjust the speed of the blade. The blade of this tool normally moves backward and forwards at very high speeds.

By being able to adjust the speed, you also affect the way the oscillating tool works with the material.

For example, an oscillating tool with its blade moving at 10,000 OPM will make it remove material more aggressively.

On the other hand, at 20,000 OPM you will get a smoother finish. Especially when sanding.

You must take both the oscillating angle as well as the speed into account. For more versatility, we recommend that you get a model that comes with a variable speed.

4. Oscillating angle

You may have noticed that the blade of the oscillating tool comes at an angle. This is an important feature because a slanted blade will be able to penetrate the material more easily.

In general, the oscillating angle of the oscillating tool varies anywhere from 1 degree to 5 degrees. The greater the degree of the blade, the more aggressive the cutting will be.

Therefore, you need to choose the oscillating angle based on your need.

If you are mostly purchasing an oscillating tool for heavy-duty cutting and sanding, then a model with a higher oscillating angle and a lower speed is preferred.

On the other hand, for light sanding or cutting sensitive material, a model with a low oscillating angle and high blade speed is the best choice.

5. Portability

The portability of the oscillating tool is directly linked to its weight. A lightweight oscillating tool is generally also more portable than a heavier one.

And since a corded oscillating tool lacks a heavy lithium-ion battery pack, it also tends to be lighter and portable.

6. Accessories

Most oscillating tools come with various blades and accessories. Those accessories make the oscillating tool versatile and able to handle a wide range of tasks, from sanding to cutting.

And when it comes to accessories, the more, the better.

7. Quick-change accessory system

Ensure that your chosen oscillating tool comes with a quick-change blade system.

What this does is allow you to quickly and easily change the blades and accessories in a matter of seconds.

All you must do is push a quick-release button for the blade to come off.

Conclusion

The oscillating tool remains one of the most versatile and practical tools on the market. It seems that it can do everything, from trimming to cutting with equal ease.

Most models are affordable and come with multiple blades and accessories out of the box.

Finally, our oscillating tool review above contains some hand-picked models. If you have still not chosen an oscillating tool yet, then we recommend you read it again.