HomeGearX is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

10 Best Scroll Saw Blades [2019 Complete Guide]

Best Scroll Saw Blades

The scroll saw is one of the most practical tools for performing intricate cuts in material. However, the heart of the scroll saw is its blade, as this is the part that does the cutting.

Indeed, without a quality scroll saw blade, you cannot do any decent cutting.

Those blades come in different lengths, types, and have a wide range of cutting capacities. So, finding the right scroll saw blade can be confusing, especially if you are freshly starting out.

In order to help you, our scroll saw blade review below contains a hand-picked selection of quality models used by professional craftsmen every day.

10 Best Scroll Saw Blades – Reviews

IMAGE

​PRODUCT

​FEATURES

Olson Saw PG49802

1. Olson Saw PG49802 (Fast and Accurate Blade)

  • Cuts through material fast and easily
  • It can be used for intricate and accurate cuts
  • Pinless design. Compatible with modern-day scroll saws
  • Good maneuverability
Olson SAW FR49501

2. Olson SAW FR49501 (Beginner-friendly and Maneuverable)

  • Easy to use by beginners
  • Highly maneuverable
  • Comes in a wide range of teeth count
  • Versatile cutting capacity of 3/32 inches to 1 inch
Olson Saw FR49400

3. Olson Saw FR49400 (Produces a Smooth Finish)

  • Delivers a smooth and professional finish
  • You get different TPI counts
  • Varied cutting capacity of 3/32 inches to 2 inches
Hardware & Outdoor HRD-PN-79110364

4. Hardware & Outdoor HRD-PN-79110364 (Large and Versatile Cutting Capacity)

  • Versatile cutting capacity with a maximum of 2 inches
  • Can cut any type of materials easily
  • Minimizes splintering when cutting
Flying Dutchman 141951222

5. Flying Dutchman 141951222 (Best Round Scroll Saw Blade)

  • Can cut 360 degrees
  • High quality and durable. Made in Germany
  • Sizes and TPI counts are clearly marked
Flying Dutchman 211850612

6. Flying Dutchman 211850612 (Superior Pack Quantity)

  • You get 72 blades
  • Does not splinter material
  • Milled for sharpness and precision
Olson Saw SP46500

7. Olson Saw SP46500 (360-degree Cutting Capacity)

  • It can easily cut in any direction
  • High carbon steel build construction
  • Affordable price and great value
Olson Saw FR42401

8. Olson Saw FR42401 (Most Affordable Solution)

  • Exceptionally affordable
  • Works with older scroll saws
  • Versatile. It can cut a wide range of materials
Bosch SS5-20

9. Bosch SS5-20 (Durable and High quality)

  • Durable and long-lasting
  • Cost-effective pricing
  • It can cut metal easily
Skilsaw 80182

10. Skilsaw 80182 (Versatile and Universal Fit)

  • You get a wide variety of blade designs
  • Works with all branded scroll saws
  • A very sharp blade that produces a smooth finish

PRODUCT

1. Olson Saw PG49802

(Fast and Accurate Blade)

Olson Saw PG49802
  • Cuts through material fast and easily
  • It can be used for intricate and accurate cuts
  • Pinless design. Compatible with modern-day scroll saws
  • Good maneuverability

2. Olson SAW FR49501

(Beginner-friendly and Maneuverable)

Olson SAW FR49501
  • Easy to use by beginners
  • Highly maneuverable
  • Comes in a wide range of teeth count
  • Versatile cutting capacity of 3/32 inches to 1 inch

3. Olson Saw FR49400

(Produces a Smooth Finish)

Olson Saw FR49400
  • Delivers a smooth and professional finish
  • You get different TPI counts
  • Varied cutting capacity of 3/32 inches to 2 inches

4. Hardware & Outdoor HRD-PN-79110364

(Large and Versatile Cutting Capacity)

Hardware & Outdoor HRD-PN-79110364
  • Versatile cutting capacity with a maximum of 2 inches
  • Can cut any type of materials easily
  • Minimizes splintering when cutting

5. Flying Dutchman 141951222

(Best Round Scroll Saw Blade)

Flying Dutchman 141951222
  • Can cut 360 degrees
  • High quality and durable. Made in Germany
  • Sizes and TPI counts are clearly marked

6. Flying Dutchman 211850612

(Superior Pack Quantity)

Flying Dutchman 211850612
  • You get 72 blades
  • Does not splinter material
  • Milled for sharpness and precision

7. Olson Saw SP46500

(360-degree Cutting Capacity)

Olson Saw SP46500
  • It can easily cut in any direction
  • High carbon steel build construction
  • Affordable price and great value

8. Olson Saw FR42401

(Most Affordable Solution)

Olson Saw FR42401
  • Exceptionally affordable
  • Works with older scroll saws
  • Versatile. It can cut a wide range of materials

9. Bosch SS5-20

(Durable and High quality)

Bosch SS5-20
  • Durable and long-lasting
  • Cost-effective pricing
  • It can cut metal easily

10. Skilsaw 80182

(Versatile and Universal Fit)

Skilsaw 80182
  • You get a wide variety of blade designs
  • Works with all branded scroll saws
  • A very sharp blade that produces a smooth finish

1. Olson Saw PG49802 – Fast and Accurate Blade

Olson Saw PG49802
  • Blade Type: Double Reverse Tooth
  • Blade Length: 5 inches
  • Cutting Capacity: 3/16 inches - 1/2 inches hardwood
  • Pack Quantity: 18

The Olson Saw PG49802 uses a double reverse teeth design to guarantee effectiveness and accuracy when cutting material.

One of the biggest advantages of this blade is that it is durable and made to cut tough material like hardwood with ease. You will enjoy a high level of maneuverability when using this blade with any type of scroll saw on the market.

Best, those blades are pinless, so it will mount securely on any modern scroll saw with ease. You get no less than 18 blades with this purchase. They come in different cutting capacities ranging from 3/16 inches to 1/2 inches, so they are quite versatile.

Not to mention that they are made from a heavy-duty steel material that is very durable and long-lasting. There will not corrode or break easily. This model is one of the best pinless scrolls saw blades that you can purchase.

The caveats with this model are that there is no clear indication of the size of the packaging.

Also, the smallest blade measures 3/16 inches in thickness, so it is quite thick and not intended for delicate cutting.

Pros:

  • Can cut through hardwood fast and accurately
  • Uses a pinless design. Compatible with modern scroll saws
  • Good level of maneuverability when cutting any type of material
  • Durable and long-lasting

Cons:

  • The instructions on the packaging could have been better
  • The blades are thick and not for delicate cutting

2. Olson SAW FR49501 – Beginner-friendly and Maneuverable

Olson SAW FR49501
  • Blade Type: Regular Skip Tooth
  • Blade Length: 5 inches
  • Cutting Capacity: 3/32 inches - 1-inch wood, plastic
  • Pack Quantity: 18

The Olson SAW FR49501 comes in a pack of 18 with different size blades. What we like the most about this blade is that it is very beginner-friendly since it uses a regular skip tooth design.

It will offer a decent level of maneuverability when cutting a wide range of materials from wood to plastic.

Moreover, it has a varied cutting capacity of 3/32 inches up to 1 inch, so it is quite versatile as well. Also, it comes in different TPI values to adapt to the material you are cutting.

You get 10 TPI, 15 TPI, and 18.5 TPI blades of different thicknesses depending on your need. In terms of ease of use, versatility, and maneuverability, this model is well worth it.

The only issues are that the blades are a bit fragile, so you need to be careful when doing turns.

Additionally, the teeth can wear out easily when cutting tough materials like hardwood. This model is clearly not the best scroll saw blade for hardwood.

Pros:

  • Beginner-friendly. Easy to use by anyone
  • Maneuverable when cutting almost any type of materials
  • Comes in different teeth count and sizes
  • Wide range of cutting capacities from 3/32 inches to 1 inch

Cons:

  • More fragile than other models
  • The teeth can easily wear out

3. Olson Saw FR49400 – Produces a Smooth Finish

Olson Saw FR49400
  • Blade Type: Skip Tooth
  • Blade Length: 5 inches
  • Cutting Capacity: 3/32 inches - 2 inches hard/softwood, plastic
  • Pack Quantity: 36

For those performing sensitive fretwork and need a smooth finish, nothing can beat the Olson Saw FR49400. This model delivers one of the smoothest cuts you will find in a scroll saw blade.

It can produce such a smooth cut mostly because of its skip tooth design that allows it to cut material fast and efficiently. This blade will deliver a sand-free finish every time.

Most impressively, it comes in wide cutting capacities of 3/32 inches to 2 inches. The 2 inches blade will cut material fast and can be used on any type of fibrous material with ease.

Those blades also come in different teeth ranging from 20 TPI to 11.5 TPI, so you have a lot of control in the amount of material that the blade cuts.

The Olson Saw FR49400 is an excellent choice for those who need a smooth cut in their scroll saw. We like the fact that you get 36 blades with this purchase, but it certainly lacks diversity as all those blades have a skip tooth design. Some diversity would have been more than welcome.

Pros:

  • Delivers a smooth and professional finish
  • Versatile cutting capacity of 3/32 inches to 2 inches
  • Comes in different TPI

Cons:

  • All the blades have a skip tooth design

4. Hardware & Outdoor HRD-PN-79110364 – Large and Versatile Cutting Capacity

Hardware & Outdoor HRD-PN-79110364
  • Blade Type: Reverse Skip Tooth
  • Blade Length: 5 inches
  • Cutting Capacity: 3/4 - 2 inches hard/softwood
  • Pack Quantity: 12

What differentiates the Hardware & Outdoor HRD-PN-79110364 from the rest of the competition is its large and versatile cutting capacity. It can cut anywhere from 3/4 inches to 2 inches hardwood with great ease.

Due to the wide variety in cutting capacity, this blade is quite versatile and an excellent blade kit for any type of fretwork. It uses a reverse skip tooth design, which means that the underside of the blade is reversed to prevent splintering of the material.

The only issue with this scroll saw blade is that it rattles a bit, especially when doing turns. Also, it is difficult to back up with this blade. This is mostly because of the reverse skip tooth at the bottom.

But other than those small caveats, this model is still one of the best pinless scrolls saw blades on the market, especially for cutting tough material like hardwood.

Pros:

  • Can cut hard materials easily
  • Comes in different cutting capacities of 3/4 to 2 inches
  • Uses a reverse skip tooth design to minimize splintering

Cons:

  • The blade rattles when doing corners
  • Difficult to back up

5. Flying Dutchman 141951222 – Best Round Scroll Saw Blade

Flying Dutchman 141951222
  • Blade Type: Spiral Blade
  • Blade Length: 5 inches
  • Cutting Capacity: Hard/softwood, plastic, metal
  • Pack Quantity: 60

The Flying Dutchman 141951222 is a set of high-quality round scroll saws blades. You get no less than 60 blades with this purchase that come in different sizes and TPI count.

Since this blade can cut in any direction, it is highly maneuverable. Indeed, the blades have a 360-degree cutting capacity and can cut materials without splintering.

As with most Flying Dutchman products, those blades are high quality and manufactured in Germany using hardened steel. They are very durable and long-lasting.

The different TPI counts make this kit versatile. The sizes are also clearly marked on the packaging.

The Flying Dutchman 141951222 is, without a doubt, the best pin end spiral scroll saw blades in this review.

The only problem we find with it is its price, which is a little bit higher than average. Also, they are a little bit more difficult to use by beginners and need some skill to cut with.

Pros:

  • Cuts in any direction with its 360-degree cutting capacity
  • Made in Germany. High-quality, durable, and long-lasting
  • It comes in a wide range of TPI counts for versatility
  • The sizes and TPI counts are clearly marked on the packaging

Cons:

  • A bit difficult to use by beginners
  • The price is a little high

6. Flying Dutchman 211850612 – Superior Pack Quantity

Flying Dutchman 211850612
  • Blade Type: Ultra-reverse Skip Tooth
  • Blade Length: 5 inches
  • Cutting Capacity: Hard/softwood
  • Pack Quantity: 72

If you need a lot of high-quality blades for your scroll saw, then you should consider the Flying Dutchman 211850612. Indeed, you get no less than 72 blades with this purchase.

They have an ultra-reverse design where the third teeth are reversed, so it will prevent material tearing and splintering from happening. This will result in a smooth and professional cut that does not require finish work.

In addition, all those blades are milled for sharpness and precision, so you will have no problem maneuvering it in a wide range of materials, from hardwood to softwood.

If you need a lot of blades with an ultra-reverse skip tooth design and price is not an issue, then you cannot beat the Flying Dutchman 211850612. It is the best scroll saw blade kit in terms of quantity as you get an impressive 72 blades with this purchase.

Pros:

  • You get 72 blades with this purchase
  • Ultra-reverse skip tooth design prevents splintering
  • Milled for sharpness and precision

Cons:

  • More expensive than other blades

7. Olson Saw SP46500 – 360-degree Cutting Capacity

Olson Saw SP46500
  • Blade Type: Spiral Blade
  • Blade Length: 5 inches
  • Cutting Capacity: Hard/softwood, plastic
  • Pack Quantity: 12

What demarks the Olson Saw SP46500 from the rest of the competition is its spiral blade design. It offers a 360-degree cutting capacity in a wide range of materials, from hardwood to plastic.

Since it can cut in any direction, this blade is highly maneuverable and can be used to perform very intricate designs.

Moreover, it is made from a high carbon steel material, so it is very durable and long-lasting.

You get a pack of 12 blades with this purchase, which should be enough for both DIY projects as well as professional use. The price is also very competitive.

This model is by far one of the best spiral scrolls saw blades that you can buy.

The only issue we find with it is that this blade comes with no instructions whatsoever. Also, it may leave a rough cut in some materials, so it will require finishing work.

Pros:

  • Can cut in any direction with its 360-degree cutting capacity
  • Made from high carbon steel. Very durable and long-lasting
  • Competitive price. Good value

Cons:

  • It may leave a rough cut in some materials
  • Does not come with any instructions

8. Olson Saw FR42401 – Most Affordable Solution

Olson Saw FR42401
  • Blade Type: N/A
  • Blade Length: 5 inches
  • Cutting Capacity: 3/32 inches - 1/2 inches hard/softwood, plastic
  • Pack Quantity: 6

The Olson Saw FR42401 is by far the best scroll saw blade when it comes to price. No other models in this review can beat it. Despite being a low-cost blade, you still get a lot for your money.

For one, it has a pin blade system, so it will have no problem fitting older scroll saws. And, you get 6 blades with this purchase, each of different sizes.

The smallest has a cutting capacity of 3/32 inches, so you do not need a large hole to insert the blade. You can do a lot of precision fretwork with this blade.

You can also use it to cut material fast because the biggest blade in this pack has a cutting capacity of 1/2 inches. It can comfortably cut almost any type of material, ranging from hardwood to plastic.

The only problem we have with this model is that you get only 6 blades. Also, they are not as durable as other models.

Pros:

  • Very affordable. Value for money
  • Uses a pin designed to work with older scroll saws
  • Versatile. Can be used to cut a wide range of materials

Cons:

  • You get only 6 blades with this purchase
  • Not as durable as others

9. Bosch SS5-20 – Durable and High quality

Bosch SS5-20
  • Blade Type: Metal Cutting Blade
  • Blade Length: 5 inches
  • Cutting Capacity: Hard/softwood, plastic, metal
  • Pack Quantity: 4

The Bosch SS5-20 is a genuine blade that is durable and long-lasting. It can be used to cut tough materials like hardwood as it will not break easily.

You get 4 blades of identical sizes out of the box. They have been precision sharpened so they will offer a consistent cutting. Also, they are very easy to install as they use a pin end system.

One of the best things that we like about this blade is its versatility, especially when cutting sheets of aluminum.

All in all, due to its heavy-duty and durable build construction, this unit is one of the best scroll saws blades for metal and hardwood.

Just note that it is a little bit more difficult to cut material intricately, and you get only 4 blades with this purchase.

Pros:

  • Excellent built construction. Durable and long-lasting
  • Very affordable price. Good value
  • Versatile. It can even cut metal
  • The blade has been precision sharpened to offer a consistent cut

Cons:

  • Difficult to use for intricate cutting
  • You get only 4 blades

10. Skilsaw 80182 – Versatile and Universal Fit

Skilsaw 80182
  • Blade Type: Olson Scroll Saw Blade
  • Blade Length: 5 inches
  • Cutting Capacity: Hard/softwood, plastic
  • Pack Quantity: 36

The Skilsaw 80182 is a versatile scroll saw blade that comes in a pack of 36 blades of different sizes and designs. This makes it very versatile when cutting different types of materials.

In addition, those blades are universally compatible with almost any type of scroll saws that uses a pin end. Due to its length of 5 inches, there is enough room for you to cut a wide range of material thicknesses.

Additionally, it is made from premium grade steel, which is durable and long-lasting. It has also been sharpened in a way to produce intricate cuts with a silky-smooth finish.

If you already own a scroll saw and looking to buy a durable and versatile blade, then the Skilsaw 80182 is one of the best scrolls saw blades for your need.

The only problem with it is that this blade is difficult to turn when cutting. However, for a straight cut, it is extremely efficient.

Pros:

  • Versatile. You get a mix of different types of blades
  • It has a universal fit on almost all branded scroll saws
  • Sharpened in a way to produce a very smooth finish

Cons:

  • It is difficult to turn when cutting

How to Buy the Best Scroll Saw Blades

How to Buy the Best Scroll Saw Blades

1. Pinned or Pinless

Pinned Scroll Saw Blade: This is the oldest type of scroll saw blade on the market. It basically uses a hook system at the base of the blade, which fixes it tightly to the scroll saw.

One of the best advantages of the pinned scroll saw blade is its ease-of-use and affordability.

However, its main disadvantage is that it is usually thicker with a thickness of 1/16 inches.

Pinless Scroll Saw Blade: The pinless blade is the most modern type of blade. Its main advantages are its very low thickness.

In fact, some of the best pinless scrolls saw blades on the market have an impressive thickness of only 1/64 inches.

This means that you do not need to have a large hole for the blade to go through, so it can be used for very accurate scroll saw cutting.

However, the main disadvantage of the pinless scroll saw is that it is a little bit more difficult to remove and replace.

2. Blade Type

Standard: The standard scroll saw blade is the most common type of blade. It has teeth that are arranged at equal distances from one another.

This type of blade is versatile and can be used to cut a wide range of materials, from wood to metal.

Skip-tooth: This type of scroll saw blade is very beginner-friendly and consists of 2 teeth pointing downward and 1 tooth upward.

The main advantage of this design is that it produces a silky-smooth cut and does not splinter material.

Reverse skip-tooth: The reverse skip tooth is the same as the traditional skip tooth blade but has teeth at the bottom of the blade in reverse position.

This reverse position will prevent material tearing when cutting sensitive material like plywood or plastic.

Double-tooth: As its name suggests, the double-tooth has 2 teeth pointing downward and then a gap for the third teeth.

For detail work and precision cutting, the double-tooth is one of the best scrolls saw blade that you can get.

Precision-ground: Also known as PGT, this type of blade has been developed by Olson. It comes in a wide range of designs from double reverse to standard.

What separates this blade from the rest is its durability, accuracy, and ease-of-use.

Spiral: The spiral scroll saw blade is an efficient type of blade for cutting any type of material fast and easily.

This design cut material at 360 degrees in any direction. The spiral design is by far the most maneuverable type of scroll saw blade on the market.

Crown-tooth: The crown tooth works in a combination of pairs. 2 teeth point up, and then 2 teeth point down.

The main advantage of this design is that can cut material in any direction and can be mounted in any position.

3. Compatibility

Before even purchasing this scroll saw blade, you need to check if the blade is compatible with your scroll saw.

Some scroll saws will use a pinned blade while others will work with the pinless type. You will need to check your scroll saw to see if the blade is compatible.

4. Cutting Capacity

If you are doing precise cutting on sensitive and soft materials, then it is best to go with the pinless blade that offers a cutting capacity of 3/32 inches.

This will offer a high level of maneuverability and accuracy when cutting without requiring a large hole for the blade to go through. For those who simply need to cut material fast with the scroll saw, a cutting capacity of at least 1 inch or more is preferred.

Additionally, you also need to consider the material type. In fact, some of the best scrolls saw blades for thick wood usually have a cutting capacity of at least 1 inch or more.

The larger width of the blade will ensure that it is more durable and will not break easily when cutting tough materials like hardwood.

5. Teeth per Inch

The teeth per inch or TPI is another important factor. The more blades it contains, the smoother the cut will be.

Manufacturers usually use numbers like 1, 3, 5, 7, and 9 to show the number of teeth per inch. 2/0 being the smallest.

A scroll saw blade with a higher TPI count will take more time to cut material because of the teeth are closer together and removes less material.

If you want a blade that removes material fast, then it is best to go with a model that has a low TPI count.

Conclusion

As we have seen, the scroll saw blade comes in many lengths, types, and cutting capacities. Each blade is made for a particular use case scenario.

If you already own a scroll saw or planning to get one, then it is always best to invest in some quality scroll saw blades.

Hopefully, our scroll saw blades review above has helped you find a quality blade.